manualshive.com logo in svg

Asus P2B98-XV, User Manual, Page: 57 / 88

Share
Download
Asus P2B98-XV User Manual Download Page 57

ASUS P2B98-XV User’s Manual

57

Support CD Main Menu

Insert your CD or double click on your CD drive icon in “My Computer” to bring up
the autorun menu or run Setup.exe in the root directory of the ASUS Support CD.

NOTE: The support CD version and contents are constantly updated without notice.

Main Menu Selections

Install Windows 95 Video Driver: Installs Windows 95 display driver, which al-
lows your onboard VGA to function properly. Please refer to sections A in this user’s
manual.

Install DirectX: Installs Microsoft DirectX, which allows 3D hardware accelera-
tion support in Windows 95.

Install Video Player: Installs PowerPlayer video player, which allows you to view
video CD (*.DAT) or MPEG (*.MPG) CD titles.

Install PCCillin: Installs PC-cillin virus protection software. Please view the online
help if you have any questions.

BusMaster:  Installs the Intel BusMaster IDE drivers for improved performance.

Patch for PIIX4 chipset:  Installs the necessary drivers for PCI card and PCI bridge
for Windows 95/95a (OSR1) and 95b (OSR2) for ASUS motherboards.

Browse this CD: Allows you to quickly view the contents of the CD using Win-
dows Explorer.

Technical Support Form:  View the ASUS Technical Support Form.

Read Me: View additional notes concerning this product.

Exit:  Exit the current menu.

V

. Support CD

Main Menu

V. Support CD

Summary of Contents for P2B98-XV

























































































Reviews:

No comments