manualshive.com logo in svg

Asus P2B-VM, User Manual, Page: 65 / 96

Share
Download
Asus P2B-VM User Manual Download Page 65

ASUS P2B-VM User’s Manual

65

B. Other Video Drivers

Video Driver Installation for Windows NT 4.0

IMPORTANT!

•

Windows NT 3.5x does not support AGP cards.

•

Before installing the ASUS display driver in Windows NT 4.0, make sure that
you have installed the Windows NT 4.0 Service Pack version 3.0 (available on
the Internet at  http://www.microsoft.com/isapi/support/bldqpage.idc?Product
Page=q_servpk). Otherwise, the system will hang and will not be able to start up!

•

For all the AGP features to be available you must be using Windows NT 5.0
(available in the future)

Installing Video Drivers for Windows NT 4.0

Windows NT will default to standard VGA mode (640x480, 16 colors) when you
first start up. Follow the procedure below to install the video driver and player for
Windows NT 4.0.

To install the video driver and player for Windows NT 4.0
1. Insert the ASUS Support CD into your CD-ROM drive.

If Windows NT autoruns the CD, skip to step 5.

2. Click Start.

3. Select Run.

4. Type D:\ATISETUP (where D is your CD-ROM drive).

5. Click Easy Install to begin the Installation Wizard.

6. Follow the Wizard’s on-screen instructions to complete the installation.

B

. Other V

ideo Drivers

Windows NT 4.0

Summary of Contents for P2B-VM

































































































Reviews:

No comments