Asus P2B-D, User Manual

Page: 94 / 190

2-6
Adaptec 7800 Family Manager
8
If the following message appears, click New to replace the
existing driver and skip to Step 10.
The driver(s) for this SCSI Adapter are already on the
system. Do you want to use the currently installed driver(s)
or install new one(s).
If the following message appears, continue with Step 9.
Please enter the full path to the Windows NT SCSI Adapter
files.
9
Change the path to the
a:\winnt\3_5
directory, then click
Continue
.
The device driver is copied to your system disk and the
Windows NT configuration is updated so that the new device
driver loads when Windows NT reboots.
10
When the installation is complete, Windows NT Setup again
displays a list of currently installed host adapter types. Verify
that the new host adapter appears on the list. The text string
should look similar to:
Adaptec AHA-290x/291x/294x/4944/AIC-78xx PCI SCSI
Controller (NT 3.5x)
or
Adaptec AHA-294xu2/AIC-7890/91 PCI Ultra2 SCSI Controller
(NT 3.5x)
11
Add other types of host adapters if necessary (see step 4 on
page 2-5), or click Close to exit the SCSI adapters portion of
Windows NT Setup, and then close the program.
12
When you see this message, click OK to exit:
The changes you have made will not take effect until the
computer is restarted
If this message does not appear, no changes have been made to
the Windows NT system configuration.
13
Restart your computer and Windows NT. It is possible that
some drive letter assignments may change from the previous
configuration.