Asus P2B-D, User Manual, Page: 67 / 190

ASUS P2B-D/P2B-DS User’s Manual 67
IX. ADAPTEC EZ-SCSI
IX. EZ-SCSI UTILITY
Intro/Quick Start
Welcome to Adaptec EZSCSIVI, ADAPTEC EZ-SCSI UTILITY 4.03. Adaptec
EZSCSI gives you what you need to use DOS, Windows®3.1x, or Windows for
Workgroups3.1x.
Note: The ADAPTEC EZ-SCSI UTILITY does not provide drivers for Windows
®
95
and WindowsNT™.
Quick Start Instructions
First, install SCSI devices (see the hardware documentation for details). Then fol-
low the instructions for your operating system software in one of the following sec-
tions. We recommend that after you install Adaptec EZSCSI, you run SCSITutor to
learn more about the features of SCSI.
Windows95 or WindowsNT
If you want to install Windows95 or WindowsNT on a new computer system, you
may not be able to access your SCSI CDROM drive at first. (Usually, you install
Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM
drive, follow the DOS Quick Start instructions.
Windows/Windows for Workgroups 3.1x
1 Install Windows 3.1x or Windows for Workgroups 3.1x and start it running on
your computer.
2 Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.
3 Select File/Run from the Program Manager menu.
4 When the Run dialog box appears, type a:\setup if you are using the A drive or
b:\setup if you are using the B drive. Then click OK.
5 Follow the onscreen instructions.
DOS
1 Install DOS 6.x or later and start it running on your computer.
2 Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive.
3 At the DOS prompt, type a:\install (assuming your 3.5” floppy is A: drive).
Then press <Enter>.
4 Follow the onscreen instructions.