Asus P2B-D, User Manual

Page: 93 / 190

2-5
Microsoft Windows NT Installation
Installing the Driver When Windows NT is
Already Installed
To update or install the aic78xx.sys or aic78u2.sys driver if
Windows NT is already installed, follow the instructions below for
the version of Windows NT you are installing.
Updating Windows NT 3.5x
1
Select and start the Windows NT Setup program. (Its icon is
usually found in the Main program group.) There is a brief
pause while Windows NT Setup scans your hardware
configuration.
2
Select the Options pull-down menu and then select
Add/Remove SCSI Adapters
. The SCSI Adapter setup
program displays a list of all host adapters currently installed.
3
Click the Add button to add another host adapter type to the
list. A list of additional SCSI adapters appears.
4
Expand the list of additional SCSI adapters; select Other and
press Enter. (Requires disk provided by the hardware
manufacturer.)
5
Insert the Adaptec 7800 Family Manager Set diskette for
Windows NT into drive A
; enter one of the following paths
to the installation files and then click OK.
a:\winnt\3_5)
The screen displays the adapter drivers supported on the
diskette:
Adaptec AHA-290x/291x/294x/4944/AIC-78xx PCI SCSI
Controller (NT 3.5x)
Adaptec AHA-294xu2/AIC-7890/91 PCI Ultra2 SCSI Controller
(NT 3.5x)
6
Highlight a driver, then click OK. The driver is added to the
list of SCSI adapters.
7
Select the driver from the list of SCSI adapters and click Install.
At this point, Windows NT Setup checks to see if the specified
driver has already been copied to the system disk.