background image

3-8

Chapter 3: Starting up

Hardware monitor panels

The hardware monitor panels display the current value of a system sensor such as 

fan rotation, CPU temperature, and voltages.
The hardware monitor panels come in two display modes: hexagonal (large) and 

rectangular (small). When you check the 

Enable Monitoring Panel

 option from 

the 

Preference

 section, the monitor panels appear on your computer’s desktop.

Changing the monitor panels position

To change the position of the monitor panels on the desktop, click 

the arrow down button of the 

Scheme

 options, then select another 

position from the list box. Click 

OK

 when finished.

Moving the monitor panels

All monitor panels move together using a magnetic effect. If you want 

to detach a monitor panel from the group, click 

the horseshoe magnet icon. You can now move 

or reposition the panel independently.

Adjusting the sensor threshold value

 

You can adjust the sensor threshold value in 

the monitor panel by clicking the arrow buttons. You can also adjust the threshold 

values using the 

Config

 window.

You cannot adjust the sensor threshold 

values in a small monitoring panel.

Large display

Small display

Click to 

increase value

Click to 

decrease 

value

Summary of Contents for P2-M2A690G - P Series - 0 MB RAM































































































Reviews: