manualshive.com logo in svg

Asus P2-M2A690G - P Series - 0 MB RAM, User Manual, Page: 68 / 94

Share
Download
Asus P2-M2A690G - P Series - 0 MB RAM User Manual Download Page 68

5-10

Chapter 5: BIOS setup

5.1.5 

ASUS CrashFree BIOS 3 utility

ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the 

BIOS file when it fails or gets corrupted during the updating process. You can 

update a corrupted BIOS file using the motherboard support CD, the floppy disk or 

the USB flash disk that contains the updated BIOS file.

•  Prepare the motherboard support CD,

 

the floppy disk, or the USB flash disk 

containing the updated motherboard BIOS before using this utility.

•  Ensure that you rename the original or updated BIOS file in the floppy disk 

or the USB flash disk to

 

M2R68L.ROM

.

Recovering the BIOS from a floppy disk

To recover the BIOS from a floppy disk:

1.  Turn on the system.

2.  Insert the floppy disk with the original or updated BIOS file to the floppy disk 

drive.

3.  The utility displays the following message and automatically checks the 

floppy disk for the original or updated BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

 

When found, the utility reads the BIOS file and starts flashing the corrupted 

BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for floppy...

Floppy found!

Reading file “

M2R68L.ROM”. Completed.

Start flashing...

DO NOT shut down or reset the system while updating the BIOS! Doing so can 

cause system boot failure!

4.  Restart the system after the utility completes the updating process.

Install memory module in DIMM_A1 or DIMM_B1 slots.

Summary of Contents for P2-M2A690G - P Series - 0 MB RAM































































































Reviews:

No comments