Asus P I-P55TVP4, User Manual

Page: 14 / 64

ASUS P/I-P55TVP4 User's Manual 8
3. Total Level 2 Cache Size Setting (JP4)
This jumper sets the total amount of L2 cache that is present. If you have two
cache chips onboard (see "Map of Motherboard" for locations), then you have
256KB. A cache module can be used to upgrade the 256KB version to 512KB.
If there is no onboard cache, you may install a cache module of either 256KB or
512KB. IMPORTANT: See "External Cache" for installation procedures.
Regardless of your cache combination, set the following jumpers according to
the total amount of L2 cache that is present onboard and installed as a module.
Selections JP4
256KB [2-3] (default)
512KB [1-2]
Total L2 Cache Size Setting (256KB / 512KB)
256KB
512KB
1
2
3 1
2
3
JP4
JP4
4. CMOS RAM (JP7)
This clears the user-entered information stored in the CMOS RAM of the Real
Time Clock such as hard disk information and passwords. To clear the RTC
data: (1) Turn off the PC, (2) Short this jumper, (3) Power on the PC, (4) Turn
off the PC, (5) Remove this jumper, (6) Power on the PC, (7) Hold down
<Delete> during bootup and enter BIOS setup to re-enter user preferences.
Selections JP7
Operation [open] (Default)
Clear CMOS Data [short] (momentarily)
CMOS RAM (Operation / Clear CMOS Data)
JP7
Operation (Default)
Clear Data
JP7
III. INSTALLATION
(Jumpers)
III. INST
ALLA
TION