Asus Motherboard DSBV-D User Manual Download

Page: 53 / 182

ASUS DSBV-D

2-33

2.8

Connectors

2.8.1

Rear panel connectors

LAN port LED indications

ACT/LINK LED

SPEED LED

Status

Description

Status

Description

OFF

No link

OFF

10 Mbps connection

GREEN

Linked

ORANGE 100 Mbps connection

BLINKING Data activity GREEN

1000 Mbps connection

LAN port

SPEED

LED

ACT/LINK

LED

4. Serial (COM1) port.

This 9-pin communication port is for pointing devices or

other serial devices.

5. Video Graphics Adapter port.

This port is for a VGA monitor or other VGA-

compatible devices.

6. LAN (RJ-45) ports.

These ports allow Gigabit connection to a Local Area

Network (LAN) through a network hub. Refer to the table below for the LAN

port LED indications.

1. PS/2 mouse port (green).

This port is for a PS/2 mouse.

2. PS/2 keyboard port (purple).

This port is for a PS/2 keyboard.

3. USB 2.0 ports 1 and 2.

These two 4-pin Universal Serial Bus (USB) ports

are available for connecting USB 2.0 devices.

Summary of Contents for Motherboard DSBV-D























































































































































































Search results

Summary of Contents for Motherboard DSBV-D

Reviews:

Related manuals for Motherboard DSBV-D

Brands by name

Popular brands

Asus Motherboard DSBV-D, User Manual

Search results

Summary of Contents for Motherboard DSBV-D

Reviews:

Related manuals for Motherboard DSBV-D

Brands by name

Popular brands