Asus Motherboard DSBV-D User Manual Download

Page: 148 / 182

5-32

Chapter 5: RAID configuration

6. Use the up/down arrow key to select the stripe size for the RAID 0 array, then

press <Enter>. The available stripe size values range from 4 KB to 128 KB.

The default stripe size is 128 KB.

A lower stripe size is recommended for server systems. A higher stripe size

is recommended for multimedia computer systems used mainly for audio and

video editing.

7. Highlight the Capacity item, enter the desired RAID volume capacity, then

press <Enter>. The default value indicates the maximum allowed capacity.

8. When the Create Volume item is highlighted, press <Enter>.

A warning message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9. Press <Y> to create the RAID volume and return to the main menu, or <N> to

go back to the Create Array menu.

Summary of Contents for Motherboard DSBV-D























































































































































































Search results

Summary of Contents for Motherboard DSBV-D

Reviews:

Related manuals for Motherboard DSBV-D

Brands by name

Popular brands

Asus Motherboard DSBV-D, User Manual

Search results

Summary of Contents for Motherboard DSBV-D

Reviews:

Related manuals for Motherboard DSBV-D

Brands by name

Popular brands