Asus Motherboard DSBV-D User Manual Download

Page: 130 / 182

5-14

Chapter 5: RAID configuration

5.2.3

Adding or viewing a RAID configuration

You can add a new RAID configuration or view an existing configuration using the

View/Add Configuration command.

Adding a new RAID configuration

To add a new RAID configuration:

1. From the Management Menu, highlight Configure, then press <Enter>.
2. Use the arrow keys to select View/Add Configuration, then press <Enter>.

3. The ARRAY SELECTION MENU displays the available drives connected

to the SATA ports. Select the drive(s) you want to include in the RAID set,

then press <SpaceBar>. When selected, the drive indicator changes from

READY

to ONLIN A[X]-[Y], where X is the array number, and Y is the drive

number.

The information of the selected hard disk drive displays at the bottom of the

screen.

Summary of Contents for Motherboard DSBV-D























































































































































































Search results

Summary of Contents for Motherboard DSBV-D

Reviews:

Related manuals for Motherboard DSBV-D

Brands by name

Popular brands

Asus Motherboard DSBV-D, User Manual

Search results

Summary of Contents for Motherboard DSBV-D

Reviews:

Related manuals for Motherboard DSBV-D

Brands by name

Popular brands