Asus Motherboard A8N-SLI Premium User Manual Download Page 56

Page: 56 / 182

2-30

Chapter 2: Hardware information

• System warning speaker (Orange 4-pin SPEAKER)

This 4-pin connector is for the chassis-mounted system warning

speaker. The speaker allows you to hear system beeps and warnings.

• Power/Soft-off button (Yellow 2-pin PWRSW)

This connector is for the system power button. Pressing the power

button turns the system ON or puts the system in SLEEP or SOFT-OFF

mode depending on the BIOS settings. Pressing the power switch for

more than four seconds while the system is ON turns the system OFF.

• Reset button (Blue 2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for

system reboot without turning off the system power.

Summary of Contents for Motherboard A8N-SLI Premium























































































































































































Search results

Summary of Contents for Motherboard A8N-SLI Premium

Reviews:

Asus Motherboard A8N-SLI Premium, User Manual, Page: 56 / 182

Search results

Summary of Contents for Motherboard A8N-SLI Premium

Reviews: