Asus Motherboard A8N-SLI Premium User Manual Download Page 121

Page: 121 / 182

ASUS A8N-SLI Premium

5-3

The screen display and drivers option may not be the same for different

operating system versions.

USB 2.0 Driver

Installs the Universal Serial Bus 2.0 (USB 2.0) driver.

5.2.3 Utilities menu

The Utilities menu shows the applications and other software that the

motherboard supports.

NVIDIA Chipset nTune Utility

Installs the NVIDIA

nTune™ utility that allows easy and safe system tuning

for optimum performance.

ASUS PC Probe

This smart utility monitors the fan speed, CPU temperature, and system

voltages, and alerts you of any detected problems. This utility helps you

keep your computer in healthy operating condition.

ASUS Update

Allows you to download the latest version of the BIOS from the ASUS

website.

Before using the ASUS Update, make sure that you have an Internet

connection so you can connect to the ASUS website.

Summary of Contents for Motherboard A8N-SLI Premium























































































































































































Search results

Summary of Contents for Motherboard A8N-SLI Premium

Reviews:

Asus Motherboard A8N-SLI Premium, User Manual, Page: 121 / 182

Search results

Summary of Contents for Motherboard A8N-SLI Premium

Reviews: