Asus Motherboard A8N-SLI Premium User Manual Download Page 160

Page: 160 / 182

5-42

Chapter 5: Software support

5.7.2 Launching the Cool ʻnʼ Quiet!™ software

The motherboard support CD includes the Cool ʻnʼ Quiet!™ software that

enables you to view your systemʼs real-time CPU Frequency and voltage.

To launch the Cool ʻnʼ Quiet!™ program:

1. If you are using Windows

98SE/ME/2000, click the Start button.

Select Programs > ASUS > Cool & Quiet > Cool & Quiet.

2. If you are using Windows

XP, click the Start button. Select All

Programs > ASUS > Cool & Quiet > Cool & Quiet.

3. The Cool ʻnʼ Quiet!™ technology screen appears and displays the

current CPU Frequency and CPU Voltage.

Make sure to install the Cool ʻnʼ Quiet!™ software from the motherboard

support CD. Refer to section “5.2.3 Utilities menu”, for details.

Summary of Contents for Motherboard A8N-SLI Premium























































































































































































Search results

Summary of Contents for Motherboard A8N-SLI Premium

Reviews:

Asus Motherboard A8N-SLI Premium, User Manual, Page: 160 / 182

Search results

Summary of Contents for Motherboard A8N-SLI Premium

Reviews: