Asus ML248 Series, User Manual

Page: 16 / 20

3-2
2. Color
You can adjust brightness,
contrast, sharpness, saturation,
position (VGA only), and focus
(VGA only) from this menu.
• Brightness : the adjusting
range is from 0 to 100.
is a hotkey to activate this
function.
• Contrast
: the adjusting range is from 0 to 100. is a hotkey to
activate this function.
• Saturation : the adjusting range is from 0 to 100.
• Color Temp. : contains four color modes including Cool, Normal, Warm,
and User Mode.
• Skin Tone : contains three color modes including Reddish, Natural, and
Yellowish.
• Smart View
: provides better display quality under big viewing angle.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
3. Image
Select the image color you like
from this function.
• Sharpness : the adjusting
range is from 0 to 100.
• Trace Free : adjusts the
response time of the monitor.
• Aspect Control
: adjusts the
aspect ratio to full, 4:3, or
overscan (only available for the HDMI input).
• ASCR
: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
• Position : adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
• Focus : reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from 0
to 100.
• Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
• Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.