manualshive.com logo in svg

Asus MEL-C, User Manual, Page: 7 / 80

Share
Download
Asus MEL-C User Manual Download Page 7

ASUS MEL-C User’s Manual

7

I.  INTRODUCTION

I. INTRODUCTION

Sections/Checklist

How this manual is organized

This manual is divided into the following sections:

I.

Introduction

Manual information and checklist

II.

Features

Information and specifications concerning this product

III. Hardware Setup

Instructions on setting up the motherboard

IV.

BIOS Setup

Instructions on setting up the BIOS software

V.

Software Setup

Instructions on setting up the included support software

VI.

Software Reference Reference material for the included support software

VII. Appendix

Information on available optional hardware

Item Checklist

Check that your package is complete. If you discover damaged or missing items,
please contact your retailer.

(1) ASUS Motherboard

(1) IDE ribbon cable for master and slave drives

(1) Ribbon cable for (1) 5.25” and (2) 3.5” floppy disk drives

(1) Bag of spare jumper caps

(1) Support CD with drivers and utilities

(1) This Motherboard User’s Manual

ASUS IrDA-compliant infrared module (optional)

ASUS PCI-L101 Wake-On-LAN 10/100 Fast Ethernet Card (optional)

Summary of Contents for MEL-C

















































































Reviews:

No comments