manualshive.com logo in svg

Asus MEL-C, User Manual, Page: 10 / 80

Share
Download
Asus MEL-C User Manual Download Page 10

10

ASUS MEL-C User’s Manual

II.  FEATURES

Features

II.  FEA

TURES

Intelligent Features:
•

Dual Function Power Button: The system can be in one of two states, one is
Sleep mode and the other is the Soft-Off mode. Pushing the power button for
less than 4 seconds places the system into Sleep mode. When the power button
is pressed for more than 4 seconds, it enters the Soft-Off mode.

•

Remote Ring On (requires modem): This allows a computer to be turned on
remotely through an internal or external modem. With this benefit on-hand, any
user can access vital information from their computer from anywhere in the world!

•

Message LED (requires ACPI OS support): Chassis LEDs now act as infor-
mation providers. Through the way a particular LED illuminates, the user can
determine the stage the computer is in. A simple glimpse provides useful infor-
mation to the user.

•

Keyboard Power Up: Keyboard Power Up can be enabled or disabled to allow
the computer to be powered on by pressing the space bar on the keyboard.

Summary of Contents for MEL-C

















































































Reviews:

No comments