Asus M5A88-V EVO User Manual Download Page 85

Page: 85 / 124

ASUS M5A88-V EVO

3-29

Chapter 3

3.7

Power menu

The Power menu items allow you to change the settings for the Advanced Power

Management (APM). Select an item then press <Enter> to display the configuration options.

3.7.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used

for system suspend.

[Auto]

The system automatically configures the ACPI suspend mode.

[S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
[S3 only]

Sets the ACPI suspend mode to S3/STR (Suspend To RAM).

3.7.2

ACPI 2.0 Support [Enabled]

[Disabled]

The system will not add additional tables as per ACPI 2.0 specifications.

[Enabled]

The system adds additional tables as per ACPI 2.0 specifications.

3.7.3

ACPI APIC Support [Enabled]

[Disabled]

The system disables the Advanced Configuration and Power Interface

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).

[Enabled]

The ACPI APIC table pointer is included in the RSDT pointer list.

M5A88-V EVO BIOS Setup Version 0207

Main Ai Tweaker

Advanced

Power

Boot Tools Exit

Select the ACPI state

used for System

Suspend.

←→

Select Screen

↑↓

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

Power Settings

Suspend Mode

[Auto]

ACPI 2.0 Support

[Enabled]

ACPI APIC Support

[Enabled]

APM Configuration

Hardware Monitor Configuration

Anti Surge Support

[Enabled]

NB Thermal Protect

[Enabled]

Summary of Contents for M5A88-V EVO





























































































































Search results

Summary of Contents for M5A88-V EVO

Reviews:

Related manuals for M5A88-V EVO

Brands by name

Popular brands

Asus M5A88-V EVO, User Manual

Search results

Summary of Contents for M5A88-V EVO

Reviews:

Related manuals for M5A88-V EVO

Brands by name

Popular brands