Asus M5A88-V EVO User Manual Download Page 44

Page: 44 / 124

2-26

Chapter 2: Hardware information

Chapter 2

2.8.3

Internal connectors

Drive jumper setting

Mode of device(s)

Cable connector

Single device

Cable-Select or Master

Black

Two devices

Cable-Select

Master

Black

Slave

Gray

Master

Black or gray

Slave

•

Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA

cable connector. This prevents incorrect insertion when you connect the IDE cable.

•

Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices.

If any device jumper is set as “Cable-Select”, ensure that all other device jumpers have the

same setting.

IDE connector (40-1 pin PRI_EIDE)

The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable. There are

three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray.

Connect the blue connector to the motherboard’s IDE connector, then select one of the

following modes to configure your device.

M5A88-V EVO

PRI_EIDE

NOTE:

Orient the red markings

on the IDE ribbon cable to PIN 1.

PIN1

M5A88-V EVO IDE connector

Summary of Contents for M5A88-V EVO





























































































































Search results

Summary of Contents for M5A88-V EVO

Reviews:

Related manuals for M5A88-V EVO

Brands by name

Popular brands

Asus M5A88-V EVO, User Manual

Search results

Summary of Contents for M5A88-V EVO

Reviews:

Related manuals for M5A88-V EVO

Brands by name

Popular brands