Asus M5A88-V EVO User Manual Download Page 49

Page: 49 / 124

ASUS M5A88-V EVO

2-31

Chapter 2

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect

the S/PDIF Out module cable to this connector, then install the module to a slot opening

at the back of the system chassis.

The S/PDIF module is purchased separately.

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

•

If you want to connect a high-definition front panel audio module to this connector, set

the

Front Panel Select

item in the BIOS setup to

[HD Audio]

; if you want to connect

an AC'97 front panel audio module to this connector, set the item to

[AC 97]

. By

default, this connector is set to [HD]. Refer to

3.6.3 Onboard Devices Configuration

for details.

M5A88-V EVO

M5A88-V EVO Digital audio connector

SPDIF_OUT

SPDIFOUT

GND

M5A88-V EVO

M5A88-V EVO Front panel audio connector

AAFP

PIN 1

PRESENCE#

SENSE1_RETUR

SENSE2_RETUR

PORT1

PORT2

SENSE_SEN

PORT2

HD-audio-compliant

pin definition

PIN 1

AGND

MIC

MICPW

Line out_

Legacy AC’97

compliant definition

Summary of Contents for M5A88-V EVO





























































































































Search results

Summary of Contents for M5A88-V EVO

Reviews:

Asus M5A88-V EVO, User Manual, Page: 49 / 124

Search results

Summary of Contents for M5A88-V EVO

Reviews: