Asus M4N78 - PRO w/ Athlon II X2 240 User Manual Download Page 57

Page: 57 / 64

Chapter 2: BIOS setup

2-21

2.5.4

PCIPnP

The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices.

Plug And Play O/S [No]

When set to [Yes] and if you install a Plug and Play operating system, the operating

system configures the Plug and Play devices not required for boot. When set to [No], BIOS

configures all the devices in the system.

2.5.5

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press <Enter> to display the configuration options.

The

Module Version

and

USB Devices Enabled

items show the auto-detected values. If

no USB device is detected, the item shows

None

USB Functions [Enabled]

Allows you to enable or disable the USB Functions.

Configuration options: [Enabled] [Disabled]

USB 2.0 Controller [Enabled]

Allows you to enable or disable the USB 2.0 controller.

Configuration options: [Enabled] [Disabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for USB devices on legacy operating systems

(OS). Setting to Auto allows the system to detect the presence of USB devices at startup.

If detected, the USB controller legacy mode is enabled. If no USB device is detected, the

legacy USB support is disabled.

Configuration options: [Disabled] [Enabled] [Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12

Mbps). Configuration options: [FullSpeed] [HiSpeed]

USB Mass Storage Device Configuration

The USB Mass Storage Device Configuration item appears only when there are installed

USB devices.

USB Mass Storage Reset Delay [20 Sec]

Allows you to select the number of seconds POST waits for the USB mass storage

device after the start unit command. The message “No USB mass storage device

detected” appears if none is installed in the system.

Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

If set to [Auto], USB devices of less than 530MB will be emulated as Floppy, and the remaing

drives as hard drives. The [Force FDD] option can be used to force a HDD formatted drive to

boot as FDD, ex. ZIP drive.

Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM]

Summary of Contents for M4N78 - PRO w/ Athlon II X2 240

































































Search results

Summary of Contents for M4N78 - PRO w/ Athlon II X2 240

Reviews:

Related manuals for M4N78 - PRO w/ Athlon II X2 240

Brands by name

Popular brands

Asus M4N78 - PRO w/ Athlon II X2 240, User Manual

Search results

Summary of Contents for M4N78 - PRO w/ Athlon II X2 240

Reviews:

Related manuals for M4N78 - PRO w/ Athlon II X2 240

Brands by name

Popular brands