Asus M4N78 - PRO w/ Athlon II X2 240 User Manual Download Page 11

Page: 11 / 64

1.2

Package contents

Check your motherboard package for the following items.

Motherboard

ASUS M4N78 PRO motherboard

Cables

2 x Serial ATA cable

1x Ultra DMA 133/100/66 cable

Accessories

1 x I/O shield

1 x 2 in 1 Q-connector

(USB, System Panel; Retail Version only)

Application DVD

ASUS motherboard support DVD

Documentations

User manual

If any of the above items is damaged or missing, contact your retailer.

Chapter 1

Product introduction

AMD

Phenom™ II / Athlon™ X4 / Athlon™ X3 / Athlon™ X2 processors

(socket AM3)

This motherboard supports AMD

AM3 multi-core processors with unique L3 cache and

delivers better overclocking capabilities with less power consumption. It features dual-

channel DDR2 1066 memory support and accelerates data transfer rate up to 5200MT/s

via HyperTransort™ 3.0 based system bus. This motherboard also supports AMD

CPUs

in the new 45nm manufacturing process.

AMD

Phenom™ X4 / Phenom™ X3 / Athlon™ X2 / Athlon™ / Sempron™

processors (socket AM2+ / AM2)

The motherboard supports AMD

Socket AM2+ multi-core processors. It features

dual-channel DDR2 1066 memory support, data transfer rate up to 5200MT/s via

HyperTransport™ 3.0 based system bus and AMD

Cool ‘n’ Quiet!™ Technology.

1.3

Special features

1.3.1

Product highlights

1.1

Welcome!

Thank you for buying an ASUS

M4N78 PRO motherboard!

The motherboard delivers a host of new features and latest technologies, making it another

standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the items in

your package with the list below.

Chapter 1: Product introduction

1-1

Summary of Contents for M4N78 - PRO w/ Athlon II X2 240

































































Search results

Summary of Contents for M4N78 - PRO w/ Athlon II X2 240

Reviews:

Related manuals for M4N78 - PRO w/ Athlon II X2 240

Brands by name

Popular brands

Asus M4N78 - PRO w/ Athlon II X2 240, User Manual

Search results

Summary of Contents for M4N78 - PRO w/ Athlon II X2 240

Reviews:

Related manuals for M4N78 - PRO w/ Athlon II X2 240

Brands by name

Popular brands