Chapter 2: BIOS setup
2-13
DRAM Frequency [667MHz]
This item appears only when you set the
DRAM Frequency Control item to [Manual] and
allows you to manually set the DRAM frequency.
Configuration options: [667MHz] [800MHz] [1067MHz]
CPU/NB Frequency [Auto]
This item appears only when you set the
AI Overclocking item to [Manual] and allows
selection of the CPU frequency multiplier. Configuration options: [Auto] [800MHz] [1000MHz]
[1200MHz] [1400MHz] [1600MHz] [1800MHz]
2.4.3
HT Link Speed [Auto]
Allows you to set the CPU-Northbridge HyperTransport link speed.
Configuration options: [Auto] [200 MHz] [400 MHz] [600 MHz] [800 MHz] [1 GHz] [1.2 GHz]
[1.4 GHz] [1.6 GHz] [1.8 GHz]
Memory Configuration
This item appears only when you set the
AI Overclocking item to [Manual] and allows you to
change the advanced memory settings.
Bank Interleaving [Auto]
Allows you to enable or disable the bank memory interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Auto]
Allows you to set the channel interleaving mode.
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]] [Auto]
Enable Clock to All DIMMs [Disabled]
Allows you to enable unused clocks to DIMMs even the memory slots are no
populated. Configuration options: [Disabled] [Enabled]
MemClk Tristate C3/ATLVID [Disabled]
Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Allows selection of the unganged DRAM mode.
Configuration options: [Auto] [Enabled] [Disabled]
Power Down Enable [Enabled]
Allows you to enable or disable the DDR power down mode.
Configuration options: [Disabled] [Enabled]
Power Down Mode [Channel]
Appears only when you enable the
Power Down Enable
item.
Configuration options: [Channel] [Chip Select]
DRAM Timing Configuration
This item appears only when you set the
AI Overclocking item to [Manual] and allows you to
change the advanced DRAM timing settings.
Summary of Contents for M4N72-E - Motherboard - ATX
Page 1: ...Motherboard M4N72 E ...
Page 12: ...xii ...
