Asus M4N72-E - Motherboard - ATX User Manual Download Page 37

Page: 37 / 72

NVIDIA

nForce 750a SLI Serial ATA connectors (7-pin SATA1-6)

These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk

and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA

1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the

standard parallel ATA with 133 MB/s (Ultra DMA133). If you install SATA hard disk

drives to the SATA connectors, you can create a RAID 0, RAID 1, RAID 0+1, RAID 5,

or JBOD configuration through the onboard NVIDIA

nForce 750a SLI controller.

• SATA 5-6 connectors support AHCI mode and RAID mode only. Make sure to install the

AHCI driver or RAID driver in the bundled support DVD before connecting devices to

SATA 5-6 connectors. Otherwise, the devices will not work.

• Due to chipset limitation, when set any of SATA ports to RAID mode, all SATA ports run

at RAID mode together.

• You must install Windows XP

Service Pack 1 or later version before using Serial ATA

hard disk drives.

• SATA1–4 connectors are set to [SATA Mode] by default. If you intend to create a Serial

ATA RAID set using these connectors, set the SATA Mode select item in the BIOS to

[RAID Mode].

• Before creating a RAID set, refer to the manual bundled in the motherboard support DVD.
• If you intend to create a Serial ATA RAID set using these connectors, set the

SATA

Mode select

item in the BIOS to

[RAID Mode]. See page 2-11 for details.

Chapter 1: Product introduction

1-25

Summary of Contents for M4N72-E - Motherboard - ATX









































































Search results

Summary of Contents for M4N72-E - Motherboard - ATX

Reviews:

Related manuals for M4N72-E - Motherboard - ATX

Brands by name

Popular brands

Asus M4N72-E - Motherboard - ATX, User Manual

Search results

Summary of Contents for M4N72-E - Motherboard - ATX

Reviews:

Related manuals for M4N72-E - Motherboard - ATX

Brands by name

Popular brands