Asus M4N72-E - Motherboard - ATX User Manual Download Page 36

Page: 36 / 72

IDE connector (40-1 pin PRI_IDE)
The onboard IDE connector is for Ultra DMA 133/100/66 signal cable. There are three

connectors on each Ultra DMA 133 / 100 / 66 signal cable: blue, black, and gray.

Connect the blue connector to the motherboard’s IDE connector, then select one of the

following modes to configure your devices:

Drive jumper setting

Mode of device(s)

Cable connector

Single device

Cable-Select or Master

Black

Two devices

Cable-Select

Master

Black

Slave

Gray

Master

Black or gray

Slave

• Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA

cable connector. This prevents incorrect insertion when you connect the IDE cable.

• Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices.

If any device jumper is set as “Cable-Select”, ensure that all other device jumpers have the

same setting.

1-24

ASUS M4N72-E

Summary of Contents for M4N72-E - Motherboard - ATX









































































Search results

Summary of Contents for M4N72-E - Motherboard - ATX

Reviews:

Related manuals for M4N72-E - Motherboard - ATX

Brands by name

Popular brands

Asus M4N72-E - Motherboard - ATX, User Manual

Search results

Summary of Contents for M4N72-E - Motherboard - ATX

Reviews:

Related manuals for M4N72-E - Motherboard - ATX

Brands by name

Popular brands