Asus M4A79 DELUXE - Motherboard - ATX, User Manual, Page: 75 / 122

ASUS M4A79 Deluxe 3-15
Chapter 3
DRAM Command Rate [Auto]
Configuration options: [Auto] [1T] [2T]
DRAM Timing Mode [Auto]
Configuration options: [Auto] [Both]
The following sub-items appear only when you set the DRAM Timing Mode item to [Both].
TCL [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK] [7 CLK DH_Only]
TRCD [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRP [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRTP [Auto]
Specifies the read CAS# to precharge time.
Configuration options: [Auto] [2-4 CLK] [3-5 CLK]
TRAS [Auto]
Configuration options: [Auto] [5 CLK] [6 CLK] – [17 CLK] [18 CLK]
TRC [Auto]
Configuration options: [Auto]
TWR [Auto]
Configuration options: [Auto] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRRD [Auto]
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK]
TWTR [Auto]
Specifies the write to read delay when accessing the same DIMM.
Configuration options: [Auto] [1 CLK] [2 CLK] [3 CLK]
TRFC0/TRFC1 [Auto]
Configuration options: [Auto] [75ns] [105ns] [127.5ns] [195ns] [327.5ns]
DCT0/DCT1 Strength Config. [Auto]
Configuration options: [Auto] [DCT 0] [DCT 1] [Both]
3.5.9 DRAM Timing Configuration
Ai Tweaker
DRAM Timing Configuration
DRAM Command Rate [Auto]
DRAM Timing Mode [Auto]
DCT0/DCT1 Strength Config. [Auto]
DRAM Command Rate:
1T: DRAM address and
control signals are
driven for one MEMCLK
cycle.
The configuration options for some of the following items vary depending on the DIMMs
you install on the motherboard.