manualshive.com logo in svg

Asus M4A79 DELUXE - Motherboard - ATX, User Manual, Page: 51 / 122

Share
Download
Asus M4A79 DELUXE - Motherboard - ATX User Manual Download Page 51

ASUS M4A79 Deluxe

2-31

Chapter 2

5. 

USB connectors (10-1 pin USB 78; USB910; USB1112)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of 

these connectors, then install the module to a slot opening at the back of the system 

chassis. These USB connectors comply with USB 2.0 specification that supports up to 

480 Mbps connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and 

then install the Q-Connector (USB) to the USB connector onboard if your chassis supports 

front panel USB ports.

6. 

Optical drive audio connector (4-pin CD)

These connectors allow you to receive stereo audio input from sound sources such as 

a CD-ROM, TV tuner, or MPEG card.

Summary of Contents for M4A79 DELUXE - Motherboard - ATX



























































































































Reviews:

No comments