Asus M4A79 DELUXE - Motherboard - ATX User Manual Download Page 111

Page: 111 / 122

ASUS M4A79 Deluxe

4-15

Chapter 4

The Main Menu above allows you to select an operation to perform. The Main Menu options

include:
•

View Drive Assignments:

shows the status of the hard disk drives.

• Define LD:

creates a RAID 0, RAID 1, RAID 5 or RAID 10 configuration.

•

Delete LD:

deletes a selected RAID set and partition.

• Controller Configuration:

Shows the system resources configuration.

Press <1>, <2>, <3>, or <4> to enter the option you need; press <ESC> to exit the utility.

View Drive Assignments........[1]

Define LD.....................[2]

Delete LD.....................[3]

Controller Configuration......[4]

[ Main Menu ]

Press 1..4 to Select Option

[ESC] Exit

[ Keys Available ]

AMD

FastBuild™ Utility

To enter the AMD

FastBuild™ utility:

Boot up your computer.

Press <Ctrl> + <F> during POST to display the main menu of the utility.

Summary of Contents for M4A79 DELUXE - Motherboard - ATX



























































































































Search results

Summary of Contents for M4A79 DELUXE - Motherboard - ATX

Reviews:

Asus M4A79 DELUXE - Motherboard - ATX, User Manual, Page: 111 / 122

Search results

Summary of Contents for M4A79 DELUXE - Motherboard - ATX

Reviews: