Asus M4A77TD PRO U3S6 User Manual Download Page 56

Page: 56 / 64

2-16

Chapter 2: BIOS information

2.4.6

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press

<Enter>

to display the configuration options.

The Module Version and USB Devices Enabled items show the auto-detected values. If no

USB device is detected, the item shows

None

USB Functions [Enabled]

Allows you to enable or disable the USB functions. Configuration options: [Disabled]

[Enabled]

USB 2.0 Controller [Enabled]

Enables or disables USB 2.0 Controllers. Configuration options: [Disabled] [Enabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for Legacy USB storage devices, including USB flash

drives and USB hard drives. Setting to Auto allows the system to detect the presence of USB

devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device

is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled]

[Auto]

USB 2.0 Controller Mode [HiSpeed]

Allows you to configure the USB 2.0 controller in HiSpeed (480Mbps) or Full Speed

(12Mbps). Configuration options: [FullSpeed] [HiSpeed]

The following items only appear when a USB storage device is plugged in.

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay [20 Sec]

Sets the maximum time that the BIOS waits for the USB storage device to initialize.

Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

Allows you to set the emulation type. Configuration options: [Auto] [Floppy]

[Forced FDD] [Hard Disk] [CDROM]

Summary of Contents for M4A77TD PRO U3S6

































































Search results

Summary of Contents for M4A77TD PRO U3S6

Reviews:

Related manuals for M4A77TD PRO U3S6

Brands by name

Popular brands

Asus M4A77TD PRO U3S6, User Manual

Search results

Summary of Contents for M4A77TD PRO U3S6

Reviews:

Related manuals for M4A77TD PRO U3S6

Brands by name

Popular brands