Asus M2N32-SLI Deluxe Wireless Edition User Manual Download Page 56

Page: 56 / 170

2-0

Chapter 2: Hardware information

M2N32-SLI DELUXE

M2N32-SLI DELUXE
Internal audio connector

Right Audio Channel

GND
GND

Left Audio Channel

11. Optical drive audio connector (4-pin CD)

These connectors allow you to receive stereo audio input from sound sources

such as a CD-ROM, TV tuner, or MPEG card.

M2N32-SLI DELUXE

M2N32-SLI DELUXE
Parallel port connector

LPT

STB#

SPD

ACK#

AFD#

ERROR#

SLIN

SPD

PINIT#

BUSY

SLCT

12. Parallel port connector (26-1 pin LPT)

This connector is for a parallel port. Connect the parallel port module cable

to this connector, then install the module to a slot opening at the back of the

system chassis.

The parallel port cable is purchased separately.

(black)

Summary of Contents for M2N32-SLI Deluxe Wireless Edition











































































































































































Search results

Summary of Contents for M2N32-SLI Deluxe Wireless Edition

Reviews:

Asus M2N32-SLI Deluxe Wireless Edition, User Manual, Page: 56 / 170

Search results

Summary of Contents for M2N32-SLI Deluxe Wireless Edition

Reviews: