manualshive.com logo in svg

Asus M2N32-SLI Deluxe Wireless Edition, User Manual, Page: 165 / 170

Share
Download
Asus M2N32-SLI Deluxe Wireless Edition User Manual Download Page 165

ASUS M2N2-SLI Deluxe

-

6.1 

Overview

The motherboard supports the NVIDIA

®

 SLI™ (Scalable Link Interface) - Intel

®

 Edition technology that allows you to install two identical PCI Express™ 

x graphics cards. Follow the installation procedures in this section.

Requirements

•  You should have two identical SLI-ready graphics cards that are NVIDIA

®

 certified.

•  Make sure that your graphics card driver supports the NVIDIA SLI 

technology. Download the latest driver from the NVIDIA website (www.

nvidia.com).

•  Make sure that your power supply unit (PSU) can provide at least 

the minimum power required by your system. See “13. ATX power 

connectors” on page 2-2 for details.   

•  The NVIDIA SLI technology supports Windows

®

 XP™ 2-bit/bit 

operating system only.

•  Visit the NVIDIA zone website (http://www.nzone.com) for the 

latest certified graphics card and supported 3D application  list.

Summary of Contents for M2N32-SLI Deluxe Wireless Edition











































































































































































Reviews:

No comments