2-4
Chapter 2: BIOS setup
To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for
the motherboard.
2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.
3. You can launch the EZ Flash 2 by two methods.
2.1.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go
through the long process of booting from a floppy disk and using a DOS�based
utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing
<Alt> + <F2> during the Power-On Self-Test (POST).
(2) Enter BIOS setup program. Go to the
Tools
menu to select
EZ Flash2
and press <Enter> to enable it.
You can switch between drives by pressing <Tab> before the correct file
is found. Then press <Enter>.
(1)
Insert the floppy disk � USB flash disk that contains the BIOS file to the
floppy disk drive or the USB port.
Press <Alt> + <F2> during POST to display the following.
• This function can support devices such as USB flash disk, or floppy disk
with
FAT 32/16
format only.
• Do not shut down or reset the system while updating the BIOS to prevent
system boot failure!
4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update
process and automatically reboots the system when done.
ASUSTek EZ Flash 2 BIOS ROM Utility V3.00
Current ROM
Update ROM
A:
Note
[Enter] Select or Load [B] Backup [ESC] Exit
[Tab] Switch [Up/Down/Home/End] Move
FLASH TYPE:
SST 49LF008 FWH
PATH:
A:\
BOARD:
M2N-VM
VER:
0107 [0101]
DATE:
12/21/06
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
E3608_M2N-VM-DVI.indb 4
12/27/07 4:39:14 PM
Summary of Contents for M2N-VM - Motherboard - Micro ATX
Page 1: ...Motherboard M2N VM DVI E3608_M2N VM DVI indb 1 12 27 07 4 37 23 PM ...
Page 12: ...xii E3608_M2N VM DVI indb 12 12 27 07 4 37 33 PM ...
Page 46: ...1 34 Chapter 1 Product introduction E3608_M2N VM DVI indb 15 12 27 07 4 39 08 PM ...
Page 90: ...2 44 Chapter 2 BIOS setup E3608_M2N VM DVI indb 33 12 27 07 4 40 18 PM ...