ASUS M2N-VM DVI
1-21
1.9
Jumpers
1. Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in
CMOS. You can clear the CMOS memory of date, time, and system setup
parameters by erasing the CMOS RTC RAM data. The onboard button
cell battery powers the RAM data in CMOS, which include system setup
information such as system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the onboard battery.
3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins
2-3 for about 5~10 seconds, then move the cap back to pins 1-2.
4. Reinstall the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup to
re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper
default position. Removing the cap will cause system boot failure!
You do not need to clear the RTC when the system hangs due to overclocking.
For system failure due to overclocking, use the C.P.R. (CPU Parameter Recall)
feature. Shut down and reboot the system so the BIOS can automatically reset
parameter settings to default values.
M2N-VM DVI
R
M2N-VM DVI Clear RTC RAM
CLRTC
Normal
Clear RTC
(Default)
1 2
2 3
E3608_M2N-VM-DVI.indb 2
12/27/07 4:38:37 PM
Summary of Contents for M2N-VM - Motherboard - Micro ATX
Page 1: ...Motherboard M2N VM DVI E3608_M2N VM DVI indb 1 12 27 07 4 37 23 PM ...
Page 12: ...xii E3608_M2N VM DVI indb 12 12 27 07 4 37 33 PM ...
Page 46: ...1 34 Chapter 1 Product introduction E3608_M2N VM DVI indb 15 12 27 07 4 39 08 PM ...
Page 90: ...2 44 Chapter 2 BIOS setup E3608_M2N VM DVI indb 33 12 27 07 4 40 18 PM ...