1-18
Chapter 1: Product introduction
1.8
Expansion slots
In the future, you may need to install expansion cards. The following sub-sections
describe the slots and the expansion cards that they support.
1.8.1
Installing an expansion card
To install an expansion card:
1. Before installing the expansion card, read the documentation that came with
it and make the necessary hardware settings for the card.
2. Remove the system unit cover (if your motherboard is already installed in a
chassis).
3. Remove the bracket opposite the slot that you intend to use. Keep the screw
for later use.
4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
6. Replace the system cover.
1.8.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1. Turn on the system and change the necessary BIOS settings, if any. See
Chapter 2 for information on BIOS setup.
2. Assign an IRQ to the card. Refer to the tables on the next page.
3. Install the software drivers for the expansion card.
Make sure to unplug the power cord before adding or removing expansion
cards. Failure to do so may cause you physical injury and damage motherboard
components.
E3608_M2N-VM-DVI.indb 13
12/27/07 4:38:28 PM
Summary of Contents for M2N-VM - Motherboard - Micro ATX
Page 1: ...Motherboard M2N VM DVI E3608_M2N VM DVI indb 1 12 27 07 4 37 23 PM ...
Page 12: ...xii E3608_M2N VM DVI indb 12 12 27 07 4 37 33 PM ...
Page 46: ...1 34 Chapter 1 Product introduction E3608_M2N VM DVI indb 15 12 27 07 4 39 08 PM ...
Page 90: ...2 44 Chapter 2 BIOS setup E3608_M2N VM DVI indb 33 12 27 07 4 40 18 PM ...