Asus M2A-VM HDMI User Manual Download

Page: 38 / 100

1-26

Chapter 1: Product introduction

1.10.2. Internal.connectors

1.. Floppy.disk.drive.connector.(34-1.pin.FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert

one end of the cable to this connector, then connect the other end to the

signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when

using an FDD cable with a covered Pin 5.

2. Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch.

Connect one end of the chassis intrusion sensor or switch cable to this

connector. The chassis intrusion sensor or switch sends a high-level signal to

this connector when a chassis component is removed or replaced. The signal

is then generated as a chassis intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted with

a jumper cap. Remove the jumper caps only when you intend to use the

chassis intrusion detection feature.

M2A-VM HDMI

M2A-VM HDMI Floppy disk drive connector

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

PIN1

FLOPPY

M2A-VM HDMI

M2A-VM HDMI Chassis intrusion connector

CHASSIS

+5VSB_M

Chassis Signal GND

(Default)

Summary of Contents for M2A-VM HDMI





































































































Search results

Summary of Contents for M2A-VM HDMI

Reviews:

Related manuals for M2A-VM HDMI

Brands by name

Popular brands

Asus M2A-VM HDMI, User Manual

Search results

Summary of Contents for M2A-VM HDMI

Reviews:

Related manuals for M2A-VM HDMI

Brands by name

Popular brands