ASUS K8V motherboard
2-15
CRC Flood Enable [Disabled]
Enables or disables the CRC Flood that enable the generation of syncronized
packets on CRC Error. Configuration options: [Disabled] [Enabled]
HT Frequency [800 MHz]
Allows frequency selection of HyperTransport transfer from K8 CPU to AGP.
Configuration options: [200 MHz] [400 Mhz] [600 Mhz] [800 Mhz]
HT DATA Width (Upstream) [16 BIT]
Allows selection of HyperTransport upstream data width.
Configuration options: [16 BIT] [8 BIT]
HT DATA Width (Downstream) [16 BIT]
Allows selection of HyperTransport downstream data width.
Configuration options: [16 BIT] [8 BIT]
Memory Configuration
Memory Configuration
The Memory configuration menu item allows you to change the memory settings.
Select an item then press <Enter> to display the sub-menu.
Memory Configuration
Memory Configuration
ECC Configuration
Memory Configuration
MEMCLK can be set
by the code using
Memclock Mode
[Auto]
AUTO, or if you use
Bank Interleaving
[Auto]
LIMIT, you can set
CAS Latency (CL)
[Auto]
one of the standard
TRC
[Auto]
values.
TRFC
[Auto]
TRCD
[Auto]
TWR
[Auto]
TRWT
[Auto]
TRAS
[Auto]
TRP
[Auto]
DDR Clock Delay
[Auto]
2T Command
[Auto]
Memclock Mode [ Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or
select [Manual] to set using one of the standard values.
Configuration options: [Auto] [Limit]
