background image

20

Installation Quick Start Guide

RAID Software Suite Installation

— One blank high density floppy diskette† may be required to create the installation 

diskette 

SCO UnixWare* 7.1.1† OS software

† Not supplied 

2.7.2

OS Installation Procedures

Note:

When installing UnixWare, create only one RAID device (host drive) on which the 
operating system is to be installed.

1. Create and configure one RAID device from the BIOS of IIR Storage Console 

(accessed by pressing <Ctrl>+<g>).

2. Insert UnixWare 7.1.1 installation diskette 1 of 2 which was included with your OS 

user’s manual. Installation begins.

During the installation UnixWare prompts you to insert a Host Bus Adapter (HBA) 
diskette. Insert the RAID Software Suite Driver Installation diskette. If you do not 
have the diskette for the operating system that you are installing, then create it before 
continuing. See 

Section 2.4

 for instructions to create this disk.

3. During the installation of UnixWare, you will be prompted to install the Network 

Information Services (NIS) package. By default the installation will configure your 
system as an NIS client. See your system administrator for configuration of the NIS 
services.

Note:

Installation of this service may take an extended period of time.

If you do not plan on using the NIS or there is not an NIS server present on your 
network that you are installing this system onto, defer installation of NIS at this time 
by pressing <F8> at the NIS configuration screen. 

After completing the OS installation, proceed to 

Section 2.8

 to complete the RAID 

Software Suite installation.

2.8

RAID Software Suite Installation

2.8.1

Microsoft Windows 2000 and NT 4.0

1. Log into Windows using a user account with administrative rights.

2. Insert the RAID Software Suite CD-ROM in the CD-ROM drive. When the Intel 

Integrated RAID splash screen (see 

Figure 2-13

) appears, click on the link Install, to 

launch the Setup program.

Summary of Contents for Integrated RAID






























Reviews: