Asus Integrated RAID, Installation & Quick Start Manual

Page: 14 / 29

14 Installation Quick Start Guide
Create the RAID Software Suite Driv-
10. StorCon pauses to determine if you want to configure the selected disks for SAF-TE
Auto Hot Plug. Press <y> or <n> to confirm your choice.
11. StorCon asks if you want to set the host drive type to Cluster. Refer to your product’s
Hardware Guide to determine if clustering is supported before pressing <y> or <n> to
confirm your choice.
12. The new host drive is created (see Figure 2-9 ). When the build process is completed,
the RAID 1 disk array changes to ready status, for example, the data is fully redundant.
13. Exit StorCon by pressing <Esc> several times to escape out of the various menus and
pressing <y> to quit.
Follow the instructions in the next section to continue the installation.
2.4 Create the RAID Software Suite Driver Installation
Diskette
The RAID Software Suite CD-ROM is self-booting, assuming that your system supports
booting from the CD-ROM drive.
1. Change your computer’s BIOS setting so that your system boots from the CD-ROM.
Insert the CD-ROM into the system CD-ROM drive and power up the system. The
ROM-DOS Startup Menu appears (
Figure 2-10 ).
Figure 2-9. Newly Created Host Drive