18
Installation Quick Start Guide
Novell NetWare 4.2x and 5.x Installa-
•
20 MB of free hard disk space
•
RAID Software Suite Driver Installation Diskette for NetWare (see
for
instructions to create this diskette).
— One blank high density floppy diskette† may be required to create the installation
diskette
•
Novell NetWare 4.2x† or 5.x† software
† Not supplied
2.6.2
OS Installation Procedures
2.6.2.1
New Installation of NetWare 4.20 with the SRCRX.HAM Driver
1. Create a driver diskette from the RAID Software Suite CD-ROM. See
for
details to create this disk.
2. Start the OS installation from the NetWare CD-ROM. (NetWare 4.2x CD-ROMs are
NOT bootable so you must have a bootable DOS partition installed on your target hard
drive and have the appropriate DOS driver for your CD-ROM.)
3. At the driver summary menu select modify drivers.
4. Insert the driver diskette into drive A:
5. Press <Enter> on the IIR driver list.
6. Press <Insert> in the IIR controller driver menu.
7. Press <F3> and change the path to A:\DRIVERS\4XX then press <Enter>.
8. Select the SRCRX.HAM driver and complete the installation.
2.6.2.2
New Installation of NetWare 5.0 with the SRCRX.HAM Driver
Important:
The SRCRX.HAM driver depends on a later version of the NWPA.NLM than
was shipped on the NetWare 5.0 CD. Without the NWPA.NLM update, the SRCRX.HAM
driver will fail to load. The following procedure will allow you to upgrade the
NWPA.NLM on the fly during OS installation.
1. Create a driver diskette from the RAID Software Suite CD-ROM. See
for
details to create this disk.
2. Start the OS installation from the NetWare bootable CD-ROM.
3. The NetWare installation will eventually load a "Welcome" screen asking you to verify
the startup directory (C:\NWSERVER).
4. Press <Alt>+<F10> to exit the installation.
5. At the NetWare console prompt, type "down" and press <Enter> (the installation exits
to the boot drive's DOS prompt).
6. Insert the driver diskette into drive A:.
