2-30
Chapter 2: Getting started
2.6.8
APM
Restore AC Power Loss [Power Off]
[Power On]
The system goes into on state after an AC power loss.
[Power Off]
The system goes into off state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PCI-E/PCI [Disabled]
[Disabled]
Disables the PCI-E/PCI devices to generate a wake-on-LAN feature of the
Intel
®
/Realtek LAN device.
[Enabled]
Enables the PCI-E/PCI devices to generate a wake-on-LAN feature of the
Intel
®
/Realtek LAN device.
Power On By Ring [Disabled]
[Disabled]
Disables Ring to generate a wake event.
[Enabled]
Enables Ring to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
Disables RTC to generate a wake event.
[Enabled]
When set to [Enabled], the items
RTC Alarm Date (Days)
and
Hour/
Minute/Second
will become user-configurable with set values.
2.6.9
Network Stack Configuration
Network Stack [Disabled]
This item allows user to disable or enable the UEFI network stack. Configuration options:
[Disabled] [Enabled]
The following two items appear only when you set the previous item to [Enabled].
Ipv4 PXE Support [Enabled]
This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options:
[Disabled] [Enabled]
Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options:
[Disabled] [Enabled]
Summary of Contents for H81-M2
Page 1: ...Motherboard H81M2 ...
