Asus ESC500 G4 SFF User Manual Download

Page: 99 / 178

ASUS ESC500 G4

4-29

4.6.3

PCH-FW Configuration

TPM Device Selection [PTT]

This item allows you to select a TPM device.
[PTT]

Enables PTT in SkuMgr

[dTPM 1.2]

Disables PTT in SkuMgr

PTT/dTPM will be disabled and all data saved on it will be lost.

4.6.4

System Agent (SA) Configuration

VT-d [Disabled]

Allows you to enable virtualization technology function on memory control hub.
Configuration options: [Enabled] [Disabled]

Graphics Configuration

This item allows you to select a primary display from CPU and PCIe graphical devices.

iGPU Multi-Monitor [Disabled]

Set this item to [Enabled] to empower both integrated and discrete graphics for multi-

monitor output. iGPU shared system memory size will be fixed at 64M.
Configuration options: [Enabled] [Disabled]

Summary of Contents for ESC500 G4 SFF



















































































































































































Search results

Summary of Contents for ESC500 G4 SFF

Reviews:

Related manuals for ESC500 G4 SFF

Brands by name

Popular brands

Asus ESC500 G4 SFF, User Manual

Search results

Summary of Contents for ESC500 G4 SFF

Reviews:

Related manuals for ESC500 G4 SFF

Brands by name

Popular brands