ASUS ESC500 G4
6-23
6.4.7
Push Notice
This utility allows you get the detailed status of your system to your smart device. You can
also send messages to your smart device using this utility.
Before using this utility, ensure that you pair your computer with your smart device. For
pairing information, refer to section
Pairing your computer and smart device
.
Launching Push Notice on your computer
To launch Push Notice, click
on the left of the AI Suite 3 main menu, then select
Push
Notice
.
Push Notice screen
Click to enable Push Notice
Click to apply the settings
Click to discard the settings
Tick to select the
smart device
You can also enable the Push Notice via the Push Notice shortcut on the lower-right corner
of your screen. To do this, Click
<<
then Click
then select
.
Pairing your computer and smart device
To pair your computer and smart device:
1.
On your smart device, tap
Push Notice
to launch Push Notice.
2. Tap
Push Scan
then tap the name of your computer that you want to pair with.
To pair your computer and smart device, ensure that both are connected to the same
wireless network.
Summary of Contents for ESC500 G4 SFF
