Single Board Computer
77
EDID Data Source
Allows you to select the EDID data source.
Configuration options: [Pre-defined] [Flat Panel Display]
4.4.19 Thermal
Automatic Thermal Reporting
Allows you to configure _CRT, _PSV, and _ACO automatically based on
values recommended in BWG’s Thermal Reporting for Thermal Management
settings. Set to
[Disabled]
for manual configuration.
Configuration options: [Disabled] [Enabled]
NOTE:
The following items appear only when
Automatic Thermal
Reporting
is set to
[Disabled]
.
Critical Trip Point
This value controls the temperature of the ACPI Critical Trip Point - the point
in which the OS will shut the system off.
Configuration options: [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C]
[79 C] [87 C] [95 C] [100 C] [103 C] [110 C] [119 C] [125 C]
Passive Trip Point
This value controls the temperature of the ACPI Passive Trip Point - the point
in which the OS will begin throttling the processor.
Configuration options: [95 C] [Disabled [15 C] [23 C] [31 C] [39 C] [47 C]
[55 C] [63 C] [71 C] [79 C] [87 C] [103 C] [111 C]
Summary of Contents for E393S-IM-AA
