Asus E393S-IM-AA User Manual Download

Page: 72 / 102

Single Board Computer

4.4.13 USB Configuration

NOTE:

The

USB Devices

item shows the auto-detected values. If no

USB device is detected, the item shows

None

Legacy USB Support

[Disabled] The USB devices can be used only for the BIOS setup program.

It cannot be recognized in boot devices list.

[Enabled] Enables the support for USB devices on legacy operating

systems (OS).

[Auto]

Allows the system to detect the presence of USB devices at

startup. If detected, the USB controller legacy mode is enabled.

If no USB device is detected, the legacy USB support is disabled.

Hot-Plug Support

Globally enables or disables Hot-Plug support for the entire system. If

system has Hot-Plug capable Slots and this option set to

[Enabled]

, it

provides a Setup screen for selecting PCI resource padding for Hot-Plug.

Configuration options: [Disabled] [Enabled]

Summary of Contents for E393S-IM-AA







































































































Search results

Summary of Contents for E393S-IM-AA

Reviews:

Related manuals for E393S-IM-AA

Brands by name

Popular brands

Asus E393S-IM-AA, User Manual

Search results

Summary of Contents for E393S-IM-AA

Reviews:

Related manuals for E393S-IM-AA

Brands by name

Popular brands