Asus DSL-N17U User Manual Download Page 48

Page: 48 / 128

4.1.2 WPS

WPS (Wi-Fi Protected Setup) is a wireless security standard that
allows you to easily connect devices to a wireless network. You
can configure the WPS function via the PIN code or WPS button.

NOTE: Ensure that the devices support WPS.

To enable WPS on your wireless network:
1. From the navigation panel, go to Advanced Settings >

Wireless > WPS tab.

2. In the Enable WPS field, move the slider to ON.

Note: WPS supports authentication using Open System, WPA-Personal,

and WPA2-Personal. WPS does not support a wireless network that uses

a Shared Key, WPA-Enterprise, and WPA2-Enterprise encryption method.

3. In the WPS Method field, select Push Button or Client PIN

code. If you select Push Button, go to step 4. If you select

Client PIN code, go to step 5.

Summary of Contents for DSL-N17U

































































































































Search results

Summary of Contents for DSL-N17U

Reviews:

Related manuals for DSL-N17U

Brands by name

Popular brands

Asus DSL-N17U, User Manual

Search results

Summary of Contents for DSL-N17U

Reviews:

Related manuals for DSL-N17U

Brands by name

Popular brands