Asus DSL-N17U User Manual Download Page 29

Page: 29 / 128

NOTES:

• Low-priority packets are disregarded to ensure the transmission of

high-priority packets.

• Under Download Bandwidth table, set Maximum Bandwidth

Limit for multiple network applications in corresponding order.

The higher priority upstream packet will cause the higher priority

downstream packet.

• If there are no packets being sent from high-priority applications, the

full transmission rate of the Internet connection is available for low-
priority packets.

6. Set the highest priority packet. To ensure a smooth online

gaming experience, you can set ACK, SYN, and ICMP as the

highest priority packet.

NOTE: Ensure to enable QoS first and set up the upload and download

rate limits.

Summary of Contents for DSL-N17U

































































































































Search results

Summary of Contents for DSL-N17U

Reviews:

Related manuals for DSL-N17U

Brands by name

Popular brands

Asus DSL-N17U, User Manual

Search results

Summary of Contents for DSL-N17U

Reviews:

Related manuals for DSL-N17U

Brands by name

Popular brands