Asus CUV266-D User Manual Download | Manualshive

Page: 9 / 92

background image

ASUS CUV266-DLS User’s Manual

9

2. FEATURES

2. FEA

TURES

Specifications

•

AGP Pro Slot: Comes with an Accelerated Graphics Port (AGP) Pro slot that
supports high performance AGP cards targeted at 3D graphical applications
supporting 66MHz 4X mode. The slot is backward compatible with AGP 4X/2X
cards.

•

Wake-On-LAN: Supports Wake-On-LAN activity through a WOL connector
or an optional ASUS PCI-L101 10/100 Fast Ethernet PCI card.

•

Wake-On-Ring: Supports Wake-On-Ring activity through a PCI modem card
that supports a WOR connector.

•

PC Health Monitoring: Provides an easy way to test and manage system status
information, such as CPU and system voltages, temperatures, and fan status
through the onboard hardware ASUS ASIC and the bundled ASUS PC Probe.

•

SMBus: Features the System Management Bus interface used to physically
transport commands and information between SMBus devices.

•

PCI Expansion Slots: Provides five 32-bit PCI (Rev. 2.2) expansion slots that
support Bus Master PCI cards, such as SCSI or LAN cards, with 133MB/s
maximum throughput.

•

Smart BIOS: 2Mb firmware provides CPU/DDR SDRAM frequency
adjustments, BIOS write protection, and HD/SCSI/MO/ZIP/CD/Floppy boot
selection.

•

Enhanced ACPI and Anti-Boot Virus Protection: Programmable BIOS (Flash
EEPROM) that offers enhanced ACPI for Windows 98/2000/ME compatibility,
built-in firmware-based virus protection, and autodetection of most devices for
a virtual automatic setup.

•

IrDA: Supports an optional infrared port module for wireless interface.

•

Desktop Management Interface (DMI): Supports DMI through BIOS that
allows hardware to communicate within a standard protocol and create a higher
level of compatibility. (Requires DMI-enabled components.)

•

Onboard LED: Comes with a power LED that lights up if there is any standby
power on the motherboard. This LED acts as a reminder to turn off the system
power before plugging or unplugging devices to prevent damage to the
motherboard, peripherals, and other system components.

•

Easy Connectivity and System Information Access: Supports an optional
ASUS iPanel, an easy-to-access box with system diagnostic display area, system
status LEDs, USB ports, and hot keys. The AFPANEL connector on the
motherboard accommodates the ASUS iPanel.

«
...
7
8
9
10
11
...
»

Summary of Contents for CUV266-D





























































































Reviews:

No comments

Related manuals for CUV266-D

Brand: Intel Pages: 89

Brand: AOpen Pages: 96

Brand: Intel Pages: 78

Brand: TYAN Pages: 63

Brand: Inrevium Pages: 57

Brand: Gigabyte Pages: 36

Brand: C&T Solution Pages: 48

Brand: Safran Pages: 29

Brand: NXP Semiconductors Pages: 19

Brand: Aaeon Pages: 78

Brand: Zamel Pages: 3

Brand: Gigabyte Pages: 96

Brand: DFI Pages: 92

Brand: DFI Pages: 73

Brand: DFI Pages: 82

MPG X570 GAMING PRO CARBON WIFI

Brand: MSI Pages: 176

Brand: JETWAY Pages: 42

K9AG Neo2-Digital

Brand: MSI Pages: 103

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands