Asus CUV266-D, User Manual

Page: 40 / 92

40 ASUS CUV266-DLS User’s Manual
3. HARDWARE SETUP
Connectors
3. H/W SETUP
11) Power Supply Connectors (20-pin block ATXPWR, 6-pin EAUXPWR)
These connectors connect to an ATX 12V power supply. The plugs from the power
supply fit in only one orientation because of the different hole sizes. Find the
proper orientation and push down firmly making sure that the pins are aligned.
IMPORTANT:
Make sure that the ATX 12V power supply (minimum
recommended wattage: 230W) can supply at least 10mA on the +5-volt standby
lead (+5VSB). The system may become unstable and experience difficulty in
powering up if the power supply is inadequate. For Wake-On-LAN support, the
ATX power supply must supply at least 720mA +5VSB.
®
CUV266-DLS
0 1 0 1 0 1 0 1
CUV266-DLS ATX Power Connector
+3.3 V
olts
-12.0 V
olts
Ground Power Supply On Ground Ground Ground -5.0 V
olts
+5.0 V
olts
+5.0 V
olts
Power Good
+12.0 V
olts
+3.3 V
olts
+3.3 V
olts
Ground
+5.0 V
olts
Ground
+5.0 V
olts
Ground
+5V Standby
EAUXPWR
ATXPWR
Pin 1
COM
+3V +5V