37
To set up Port Triggering:
1. From the navigation panel, go to
Advanced > Port
Triggering
tab.
2. Move the slider to
ON
to enable
Port Trigger
.
3. Configure the following settings below.
•
Service Name
: Enter a short name or description for the
service.
•
Service Type
: Select the protocol, TCP, or UDP.
•
Trigger Port From
: Specify a starting trigger port number
to open the incoming port.
•
Trigger Port To
: Specify an end trigger port number to
open the incoming port.
•
Target Port From
: Specify a starting incoming port
number to receive inbound data from the Internet.
•
Target Port To
: Specify an end incoming port number to
receive inbound data from the Internet.
4. When done, click
Add
.
