1-14
Chapter 1: Product introduction
1.7.2
Internal connectors
•
We recommend that you use an ATX 12V Specification 2.0-compliant power supply
unit (PSU) with a minimum of 300W power rating. This PSU type has 24-pin and 4-pin
power plugs.
•
DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will
not boot up.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us
for details.
2.
LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT
standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible
computers.
1.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
B85M-G PLUS
B85M-G PLUS ATX power connectors
EATXPWR
PIN 1
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
ATX12V
PIN 1
+12V DC +12V DC
GND GND
B85M-G PLUS
B85M-G PLUS Parallel Port connector
LPT
PIN 1
O_LPT_SLCT_R O_LPT_PE_R O_LPT_BUSY_R O_LPT_ACK#_R O_LPT_XPD7_R O_LPT_XPD6_R O_LPT_XPD5_R O_LPT_XPD4_R O_LPT_XPD3_R O_LPT_XPD2_R O_LPT_XPD1_R O_LPT_XPD0_R O_LPT_XSTB#_R
GND GND GND GND GND GND GND GND
O_LPT_XSLIN#_R O_LPT_XINIT#_R
O_LPT_ERROR#_R
O_LPT_XAFD#_R
Summary of Contents for b85m-h plus
Page 1: ...Motherboard B85M G PLUS ...
Page 30: ...1 22 Chapter 1 Product introduction ...
